Price : $1,788.00
Part Number : H48621X
53.2 x 40.6 mm Footprint
2.0 - 5.0 MHz
Field of Vision: 80 degrees
Micro4D Convex - Abdomen, OB/GYN
53.2 x 40.6 mm Footprint
2.0 - 5.0 MHz
Field of Vision: 80 degrees
Micro4D Convex - Abdomen, OB/GYN
KODAK 2100 Intraoral X-Ray System
Price : $2,599.00
With the KODAK 2100 Intraoral X-Ray System, very high frequency (DC) technology is more affordable than ever before. Designed for dental professionals seeking ease of use and reliability, the system provides high quality results for accurate and safe diagnoses. The flexible and smart design helps meet the needs of almost any practice.
Consistent and Safe Diagnoses
Since the safety of your patients and your staff is a key priority, the KODAK 2100 System features a very high frequency generator to help you obtain high image quality while minimizing radiation dose.
Digital and Conventional
Adapted to every type of imaging technology, the system operates with both film and digital radiography, including KODAK RVG Digital Radiography Systems, the KODAK CR 7400 Digital Radiography System and KODAK INSIGHT Film.
Easy and Fast Settings
The simple control of the timer helps you select the correct exposure settings quickly and easily. Clearly displayed on the timer, precise exposure settings are available for both KODAK dental film and radiography systems so it's easy to optimize exposure time based on the type of detector used.
Better Patient Protection
The very high frequency technology reduces the radiation exposure up to 25% in comparison with a standard generator. The high quality of the beam maximizes useful x-rays to significantly reduce levels of radiation.
Accurate Images, Quick and Easy
The 60 kV very high frequency generator provides a carefully developed blend between contrast and image definition. Complete with a 0.7 mm focal spot, it helps you obtain sharp and contrasted images for easy diagnosis. The new cone design facilitates the correct alignment of the x-ray tube head with the detector, helping reduce the risk of cone-cutting images.
X-ray generator : High frequency (300 kHz)
Focal spot : 0.7 mm
Tube voltage : 60 kV
Mounting Options : Wall, ceiling, mobile, floor
3 Arm Lengths : Short (170 cm/67 in.), Standard (188 cm/74 in.), Long (205 cm/81 in.)
2 Types of Timer : Dual-installation layout - remote or integrated to the unit
Timer Settings : Manual time settings, film or digital mode
Options and Accessories : Synchronization link with KODAK RVG system, collimators
Consistent and Safe Diagnoses
Since the safety of your patients and your staff is a key priority, the KODAK 2100 System features a very high frequency generator to help you obtain high image quality while minimizing radiation dose.
Digital and Conventional
Adapted to every type of imaging technology, the system operates with both film and digital radiography, including KODAK RVG Digital Radiography Systems, the KODAK CR 7400 Digital Radiography System and KODAK INSIGHT Film.
Easy and Fast Settings
The simple control of the timer helps you select the correct exposure settings quickly and easily. Clearly displayed on the timer, precise exposure settings are available for both KODAK dental film and radiography systems so it's easy to optimize exposure time based on the type of detector used.
Better Patient Protection
The very high frequency technology reduces the radiation exposure up to 25% in comparison with a standard generator. The high quality of the beam maximizes useful x-rays to significantly reduce levels of radiation.
Accurate Images, Quick and Easy
The 60 kV very high frequency generator provides a carefully developed blend between contrast and image definition. Complete with a 0.7 mm focal spot, it helps you obtain sharp and contrasted images for easy diagnosis. The new cone design facilitates the correct alignment of the x-ray tube head with the detector, helping reduce the risk of cone-cutting images.
X-ray generator : High frequency (300 kHz)
Focal spot : 0.7 mm
Tube voltage : 60 kV
Mounting Options : Wall, ceiling, mobile, floor
3 Arm Lengths : Short (170 cm/67 in.), Standard (188 cm/74 in.), Long (205 cm/81 in.)
2 Types of Timer : Dual-installation layout - remote or integrated to the unit
Timer Settings : Manual time settings, film or digital mode
Options and Accessories : Synchronization link with KODAK RVG system, collimators
Philips HeartStart MRx Defibrilator - AED
Price : $2.850
Used patient monitor/defibrillator/AEDPrice shown is configured as follows:
* Biphasic
* Manual Defibrillator
* AED
* 3 & 12 Lead EKG Monitoring
* 75mm Recorder/Printer
* Non-invasive Pacing
* SpO2
* NIBP
* EtCO2
* Latest Software Revison
* Philips Carry Case
Waveline EZ Portable Patient Monitor with Touch-Screen
Price : 1760
Extremely portable, feature rich, touch-screen monitor.
ECG, Respiration, SpO2, Noninvasive BP and Temperature. Available with EtCO2 and printer.
Featuring cutting-edge innovations and impeccable craftsmanship, the DRE Waveline EZ patient monitor is the perfect choice for health care professionals who demand precision, performance and affordability. It features an intuitive touchscreen that helps you quickly and accurately evaluate patient conditions, resulting in better patient care. Utilize the Waveline EZ to monitor ECG, respiration, SpO2, NIBP and temperature; it’s also available with EtCO2 monitoring and a printer.
* Weighs only 6 lbs. One of the most mobile multi parameter monitors on the market.
* Touch-screen provides immediate operation
* 8 inch high resolution color display.
* Simultaneous multi-lead ECG monitoring
* Advanced ST and arrhythmia detection
* Graphical and tabular trending
* Displays five waveforms
* Battery backup
* Audible and visual alarms
* Quick BP readings recall
Technical Specifications
Safety Approval & Quality System
* Designed to meet IEC60601-1-1988, EN60601-1-1, EN60601-2
* Class II Equipment, double insulated
* Type BF applied parts
* ISO9001 & EN46001 Certified
Power Requirements
* Power Supply AC 90-264V/47-63Hz
* Input Power =55VA
* Fuses Two fuse sockets in the rear panel indicated by “FUSE”, OI 5X20, 2A/250V
* Battery 12V/4.0AH sealed lead-acid
* Charge time =4 hours
* Operating time =2 hours (full recharge)
* Battery Charging Method Automatic
* charging after monitor is connected to AC power supply (with charge protection function)
* Discharge Protection When powered by battery, the monitor will be automatically turned off when battery power is almost used up
Performance Specifications
ECG
* Patient Safety Standard IEC60601-1-1988
* CMRR =60dB (Common Mode Rejection Ratio)
* Heart Rate Range 20 ~ 254bpm ± 1bpm
* Heart Rate Averaging 8 second average
* ST Segment Range -0.8 ~ + 0.8mV
* Interface AAMI 6-pin
* Lead Selection I, II, III (3 lead mode)
* I, II, III, aVR, aVL, aVF, V (5 lead mode) (ST and Arrhythmia analysis)
* Lead Fault Alarm Audible, Visual Input 5-lead ECG patient cable
* QRS Indicator Audible and Visual Alert
* Waveform Storage 6 minutes
* Sweep Speed 12.5/25/50 mm/sec
* Gain Selection 4mV, 2mV, 1mV, 0.5mV, 0.25mV,Auto
* Trends 2 hours -> 4 hours -> 8 hours -> 24 hours -> 48 hours
* Patient Isolation Breakdown voltage 4000VAC 50Hz 60 seconds Leakage current <10µA
* Frequency width Monitoring mode 0.5 ~ 40Hz (+0.4dB,-3.0dB) Surgery mode 0.5 ~ 20Hz (+0.4dB, -3.0dB) not calibration significant
* Patient Drive Current <10µA
* Enclosure Leakage Current <0.1mA
* Maximum T Wave Rejection Capability 1.2mV
* Heart Rate Alarm Response Time < 7 seconds
* Aspect Ratio 0.24 ~ 0.6 sec/mV
* Alarm Frequency Low alarm: 2-2.4kHz High alarm: 3-3.4kHz
* Defibrillator Protected & ESIS Protected Tested with 5kV
* Recovery Time Following Defibrillation <5 seconds
Respiration
* Measurement Method Thoracic Impedance
* Respiration Rate Range 0 ~ 100±1rpm
* Accuracy ±2 rpm
Pulse Oximetry (SpO2)
* SpO2 Range 0-100% Adult/Pediatric/Neonate
* SpO2 Averaging 8 second average
* SpO2 Accuracy ±2% (70 ~ 100%), ±3% (40 ~ 70%)
* Pulse Rate Range 30 ~ 250bpm
* Pulse Rate Averaging 8 beat average
* Pulse Rate Accuracy ±1% @ 30 ~ 100bpm
* Sensor Types Finger, Universal “Y”, wrap probes
* Pulse Rate Display Digital
Non-Invasive Blood Pressure (NIBP)
* Method Automatic oscillometric
* Parameters Systolic, diastolic, mean arterial pressure, pulse
* Scale mmHg or kPa
* Operating Modes Manual, Automatic, Continuous
* Repeat Cycles 1 ~ 10, 15, 30, 60, 90, 120 minutes
* Determination Systolic, Adult/pediatric 40 ~ 250mmHg (5.3 ~ 33.3kPa) Systolic, Neonate 20 ~ 160mmHg (2.7 ~ 21.3kPa) Diastolic, Adult/pediatric 10 ~ 180mmHg (1.3 ~ 24.0kPa) Diastolic, Neonate 10 ~ 140mmHg (1.3 ~ 18.7kPa)
* Cuff Pressure Range Adult/pediatric 0 ~ 300mmHg (0 ~ 40.0kPa) Neonate 0 ~ 140mmHg (0 ~ 18.7kPa)
* Initial Cuff Inflation Adult/pediatric 170±10mmHg (22.7±1.3kPa) Neonate 100±10mmHg (16.0±1.3kPa)
* Deflation Pressure 30mmHg(4.0kPa) higher than the last systolic pressure
* Cuff Inflation Rate No greater than 50mmHg/sec
* Measurement Time Typical 25 seconds, Maximum 40 seconds, Typical Stat 20 seconds
* Pressure Display Accuracy ±3mmHg
* BP Pulse Rate Accuracy ±2% @ 40 ~240bpm
* Cuff Neonate, infant, pediatric,standard adult
Temperature (Dual Channel)
* Range 0 ~ 50°C
* Probe YSI ® 400 Skin surface or rectal /esophageal
* Scale Celsius
* Accuracy ±0.1°C
* Resolution 0.1°C
CO2
* Type Side stream, mom-dispersive IR
* CO2 Range 0-99mmHg
* Scale mmHg/kPa
* Accuracy +- 2mmHg (0-40mmHg) +- 5mmHg (41-76mmHg) +-10mmHg (77-99mmHg)
* Calibration Automatic
* Respiration Range 0-150rpm, +- 2rpm
TFT Color Display
* Size 8 inches
* Matrix 640 (H) x 480 (V) pixels
Recorder (Optional)
* Type Built-in 2-channel thermal array recorder
* Print mode Text or waveform
* Waveforms Real time or alarm-triggered
* Resolution 400dpi vertical, 800dpi horizontal
* Annotations Time, date, vital sign readings
ECG, Respiration, SpO2, Noninvasive BP and Temperature. Available with EtCO2 and printer.
Featuring cutting-edge innovations and impeccable craftsmanship, the DRE Waveline EZ patient monitor is the perfect choice for health care professionals who demand precision, performance and affordability. It features an intuitive touchscreen that helps you quickly and accurately evaluate patient conditions, resulting in better patient care. Utilize the Waveline EZ to monitor ECG, respiration, SpO2, NIBP and temperature; it’s also available with EtCO2 monitoring and a printer.
* Weighs only 6 lbs. One of the most mobile multi parameter monitors on the market.
* Touch-screen provides immediate operation
* 8 inch high resolution color display.
* Simultaneous multi-lead ECG monitoring
* Advanced ST and arrhythmia detection
* Graphical and tabular trending
* Displays five waveforms
* Battery backup
* Audible and visual alarms
* Quick BP readings recall
Technical Specifications
Safety Approval & Quality System
* Designed to meet IEC60601-1-1988, EN60601-1-1, EN60601-2
* Class II Equipment, double insulated
* Type BF applied parts
* ISO9001 & EN46001 Certified
Power Requirements
* Power Supply AC 90-264V/47-63Hz
* Input Power =55VA
* Fuses Two fuse sockets in the rear panel indicated by “FUSE”, OI 5X20, 2A/250V
* Battery 12V/4.0AH sealed lead-acid
* Charge time =4 hours
* Operating time =2 hours (full recharge)
* Battery Charging Method Automatic
* charging after monitor is connected to AC power supply (with charge protection function)
* Discharge Protection When powered by battery, the monitor will be automatically turned off when battery power is almost used up
Performance Specifications
ECG
* Patient Safety Standard IEC60601-1-1988
* CMRR =60dB (Common Mode Rejection Ratio)
* Heart Rate Range 20 ~ 254bpm ± 1bpm
* Heart Rate Averaging 8 second average
* ST Segment Range -0.8 ~ + 0.8mV
* Interface AAMI 6-pin
* Lead Selection I, II, III (3 lead mode)
* I, II, III, aVR, aVL, aVF, V (5 lead mode) (ST and Arrhythmia analysis)
* Lead Fault Alarm Audible, Visual Input 5-lead ECG patient cable
* QRS Indicator Audible and Visual Alert
* Waveform Storage 6 minutes
* Sweep Speed 12.5/25/50 mm/sec
* Gain Selection 4mV, 2mV, 1mV, 0.5mV, 0.25mV,Auto
* Trends 2 hours -> 4 hours -> 8 hours -> 24 hours -> 48 hours
* Patient Isolation Breakdown voltage 4000VAC 50Hz 60 seconds Leakage current <10µA
* Frequency width Monitoring mode 0.5 ~ 40Hz (+0.4dB,-3.0dB) Surgery mode 0.5 ~ 20Hz (+0.4dB, -3.0dB) not calibration significant
* Patient Drive Current <10µA
* Enclosure Leakage Current <0.1mA
* Maximum T Wave Rejection Capability 1.2mV
* Heart Rate Alarm Response Time < 7 seconds
* Aspect Ratio 0.24 ~ 0.6 sec/mV
* Alarm Frequency Low alarm: 2-2.4kHz High alarm: 3-3.4kHz
* Defibrillator Protected & ESIS Protected Tested with 5kV
* Recovery Time Following Defibrillation <5 seconds
Respiration
* Measurement Method Thoracic Impedance
* Respiration Rate Range 0 ~ 100±1rpm
* Accuracy ±2 rpm
Pulse Oximetry (SpO2)
* SpO2 Range 0-100% Adult/Pediatric/Neonate
* SpO2 Averaging 8 second average
* SpO2 Accuracy ±2% (70 ~ 100%), ±3% (40 ~ 70%)
* Pulse Rate Range 30 ~ 250bpm
* Pulse Rate Averaging 8 beat average
* Pulse Rate Accuracy ±1% @ 30 ~ 100bpm
* Sensor Types Finger, Universal “Y”, wrap probes
* Pulse Rate Display Digital
Non-Invasive Blood Pressure (NIBP)
* Method Automatic oscillometric
* Parameters Systolic, diastolic, mean arterial pressure, pulse
* Scale mmHg or kPa
* Operating Modes Manual, Automatic, Continuous
* Repeat Cycles 1 ~ 10, 15, 30, 60, 90, 120 minutes
* Determination Systolic, Adult/pediatric 40 ~ 250mmHg (5.3 ~ 33.3kPa) Systolic, Neonate 20 ~ 160mmHg (2.7 ~ 21.3kPa) Diastolic, Adult/pediatric 10 ~ 180mmHg (1.3 ~ 24.0kPa) Diastolic, Neonate 10 ~ 140mmHg (1.3 ~ 18.7kPa)
* Cuff Pressure Range Adult/pediatric 0 ~ 300mmHg (0 ~ 40.0kPa) Neonate 0 ~ 140mmHg (0 ~ 18.7kPa)
* Initial Cuff Inflation Adult/pediatric 170±10mmHg (22.7±1.3kPa) Neonate 100±10mmHg (16.0±1.3kPa)
* Deflation Pressure 30mmHg(4.0kPa) higher than the last systolic pressure
* Cuff Inflation Rate No greater than 50mmHg/sec
* Measurement Time Typical 25 seconds, Maximum 40 seconds, Typical Stat 20 seconds
* Pressure Display Accuracy ±3mmHg
* BP Pulse Rate Accuracy ±2% @ 40 ~240bpm
* Cuff Neonate, infant, pediatric,standard adult
Temperature (Dual Channel)
* Range 0 ~ 50°C
* Probe YSI ® 400 Skin surface or rectal /esophageal
* Scale Celsius
* Accuracy ±0.1°C
* Resolution 0.1°C
CO2
* Type Side stream, mom-dispersive IR
* CO2 Range 0-99mmHg
* Scale mmHg/kPa
* Accuracy +- 2mmHg (0-40mmHg) +- 5mmHg (41-76mmHg) +-10mmHg (77-99mmHg)
* Calibration Automatic
* Respiration Range 0-150rpm, +- 2rpm
TFT Color Display
* Size 8 inches
* Matrix 640 (H) x 480 (V) pixels
Recorder (Optional)
* Type Built-in 2-channel thermal array recorder
* Print mode Text or waveform
* Waveforms Real time or alarm-triggered
* Resolution 400dpi vertical, 800dpi horizontal
* Annotations Time, date, vital sign readings
Datascope Passport EL Multi-Parameter Patient Monitor
Price : $1,895.00
The Datascope Passport monitor measures ECG, Respiration, NIBP, SPO2, and Temperature. The Passport has a large electroluminescent screen for easy viewing from any angle. This monitor is operated with easy to use, single function keys. DRE sells the Passport refurbished.
Specifications:
* Dimension: 9.5" x 13" x 8" (H x W x L)
* Weight: 13 lbs. maximum without batteries
* Power Consumption: 15 watts typical
* Voltage input: 100, 120, 220, 240 VAC ± 10%
* Mains frequency: 47 to 65 Hz
ECG
* Leads: I, II, III
* Display sensitivity: 0.25, 0.5, 1.0, 2.0, 3.0, 4.0 cm/mV ± 10%
* Frequency response to screen: ESU filter out: 0.5 to 40 Hz, -3db max @ 1 mVpp input; ESU filter in: 0.5 to 20 Hz -3db max @ 1 mVpp input
Heart Rate Meter
* Range: 30-300 bpm adult/child. 30-350 bpm neonatal
* Accuracy: 30-250 bpm ± 3bpm or 3%, whichever is greater.
* Pacer rejection: rejects all pulse of amplitude ± 2.0 mV to ± 700 mV and duration 0.1 ms to 2 ms with no tail. Rejects all pulses ± 2.0 mV to ± 700 mV and duration 0.1 ms to 2 ms with 100 ms T.C. tail <0.8 mV or 25 ms T.C. tail <0.4 mV.
* Display update: 2 seconds ± 0.1 sec
NIBP
* Technique: oscillometric
* Systolic range: adult/ped mode: 40-250 mmHg, neonate mode: 15-150 mmHg.
* Diastolic range: adult/ped mode: 30-200 mmHg, neonate mode: 10-150 mmHg.
* Systolic accuracy: mean error less than 7 mmHg, standard deviation less than 8 mmHg (adult/pediatric). Mean error less than 3 mmHg, standard deviation less than 13 mmHg (neonatal).
* Diastolic accuracy: mean error less than 7 mmHg, standard deviation less than 8 mmHg (adult/pediatric). Mean error less than 4 mmHg, standard deviation less than 7 mmHg (neonatal).
* Heart rate meter range: 30-250 bpm.
* Heart rate meter accuracy: ±3 bpm or ±3%, whichever is greater.
Pulse Oximetry
* Accuracy (1standard deviation): 70-100%, ±2%; 60-69%, ±4%; 0-59%, unspecified.
* Response time: 13 seconds to 95% of final step change % SpO2 value from 60-95% at 72 bpm
Recorder (optional)
* Speed: 50, 25, 12.5, 6.25, 3.125 mm/sec ±5%
* Note: 6.25 and 3.125 are for respiration only
* Chart size: 50 mm ±2mm
Battery Requirements
* 2 sealed lead batteries
* Voltage: 12 VDC
* Capacity: 2.3 AH each
* Run time: 2 hours fully charged battery
* Recharge time: 16 hours maximum
* Low battery warning: 11.6 ± 3.5%
* Low battery cut off: 11.0 ± 2.8%
Specifications:
* Dimension: 9.5" x 13" x 8" (H x W x L)
* Weight: 13 lbs. maximum without batteries
* Power Consumption: 15 watts typical
* Voltage input: 100, 120, 220, 240 VAC ± 10%
* Mains frequency: 47 to 65 Hz
ECG
* Leads: I, II, III
* Display sensitivity: 0.25, 0.5, 1.0, 2.0, 3.0, 4.0 cm/mV ± 10%
* Frequency response to screen: ESU filter out: 0.5 to 40 Hz, -3db max @ 1 mVpp input; ESU filter in: 0.5 to 20 Hz -3db max @ 1 mVpp input
Heart Rate Meter
* Range: 30-300 bpm adult/child. 30-350 bpm neonatal
* Accuracy: 30-250 bpm ± 3bpm or 3%, whichever is greater.
* Pacer rejection: rejects all pulse of amplitude ± 2.0 mV to ± 700 mV and duration 0.1 ms to 2 ms with no tail. Rejects all pulses ± 2.0 mV to ± 700 mV and duration 0.1 ms to 2 ms with 100 ms T.C. tail <0.8 mV or 25 ms T.C. tail <0.4 mV.
* Display update: 2 seconds ± 0.1 sec
NIBP
* Technique: oscillometric
* Systolic range: adult/ped mode: 40-250 mmHg, neonate mode: 15-150 mmHg.
* Diastolic range: adult/ped mode: 30-200 mmHg, neonate mode: 10-150 mmHg.
* Systolic accuracy: mean error less than 7 mmHg, standard deviation less than 8 mmHg (adult/pediatric). Mean error less than 3 mmHg, standard deviation less than 13 mmHg (neonatal).
* Diastolic accuracy: mean error less than 7 mmHg, standard deviation less than 8 mmHg (adult/pediatric). Mean error less than 4 mmHg, standard deviation less than 7 mmHg (neonatal).
* Heart rate meter range: 30-250 bpm.
* Heart rate meter accuracy: ±3 bpm or ±3%, whichever is greater.
Pulse Oximetry
* Accuracy (1standard deviation): 70-100%, ±2%; 60-69%, ±4%; 0-59%, unspecified.
* Response time: 13 seconds to 95% of final step change % SpO2 value from 60-95% at 72 bpm
Recorder (optional)
* Speed: 50, 25, 12.5, 6.25, 3.125 mm/sec ±5%
* Note: 6.25 and 3.125 are for respiration only
* Chart size: 50 mm ±2mm
Battery Requirements
* 2 sealed lead batteries
* Voltage: 12 VDC
* Capacity: 2.3 AH each
* Run time: 2 hours fully charged battery
* Recharge time: 16 hours maximum
* Low battery warning: 11.6 ± 3.5%
* Low battery cut off: 11.0 ± 2.8%
Multi Parameter Monitors Colin BP-S510 Patient Monitor
Price : $2100
The BP-S510 has a sophisticated design that provides simple, user-friendly operation. Its advanced functionality makes it perfect for a wide variety of uses, including post-anesthesia care, ambulatory surgery, endoscopy, emergency rooms and more!
* Measures ECG (3/5 lead), heart rate, Colin NIBP, Nellcor SpO2 and respiration. Available with temperature, two-channel IBP, EtCO2, and a printer.
* Compact: Conveniently compact and feature-packed, the BP-S510 is great for areas where space is at a premium.
* Lightweight: Weighing only 12.1 lbs, the BP-S510 is easy to carry from ward to ward. This lightweight device makes it easy to move to stepdown, PACU, RR, etc.
* Battery Operation for Portability: Available with rechargeable batteries, the BP-S510 can be used during transport within your facility.
* Wide Viewing Angle: The BP-S510’s large LCD screen features a wide viewing angle. Each parameter is color-coded in bright and vivid colors, making the information easy to read even from a distance. You can also select from multiple views to highlight just the information you need.
Technical Specifications
Non-Invasive Blood Pressure (NIBP) - Patented Colin Technology
* Measurement technology Oscillometric method
* Measurement method Linear deflation method
* Pressure display range 10 to 300mmHg
* Pressure display accuracy Less than ±3mmHg
* NIBP Measurement range
* Adult/pediatric mode
SYS 60 to 250mmHg
MAP 45 to 235mmHg
DIA 40 to 200mmHg
Pulse rate 40 to 200bpm
* Pulse rate 40 to 240bpm
* NIBP accuracy AAMI SP-10:2002+A1:2003
* Pulse rate accuracy ±2% or ±2 beats
ECG (Electrocardiogram)
* Leads 3/5 Lead
* Lead I, II, III, aVR, aVL, aVF, V (Chest Lead)
* Heart Rate
* Measurement Range 20 to 250bpm
* Accuracy ±3bpm or ±5% (whichever is greater)
Respiration (im RR)
* Measurement method Trans-thoracic impedance
* Leads RA to LA
* Range 0, 3 to 120breaths/min
* Accuracy ±3 breaths/min
SpO2 (Pulse oximeter)
* Measurement method 2 wave length pulse wave type
* Range 1 to 100% SpO2
* Accuracy Adult/pediatric (When using SpO2 Disposable Sensor MAX-A) 70 to 100% SpO2 ±2 digits, 1 to 69% SpO2 unspecified
* Pulse Rate Range 20 to 250bpm
* Pulse Rate Accuracy ±3bpm
* Display update Less than 30 sec
Temperature Measurement (Option)
* Measurement method Thermistor
* Probe Type Thermistor probe YSI 400 series (2 channels) (Probes not included)
* Range 15 to 45°C (59 to 113°F)
* Display Accuracy ±0.1°C (25 to 45°C) (77 to 113°F) ±0.2°C (15 to less than 25°C) (59 to less than 77°F)
* Probe Accuracy ±0.1°C (±0.18°F)
IBP (Option)
* Measurement Method: Pressure Transducer Method
* Pressure Measurement Range - -50 to +300mmHG
* Pulse Rate Measurement Range – 20 to 250bpm
* Display Accuracy - ±3mmHG
* Standard – IEC60601-2-34:2000
CO2 (Option)
* Measurement method Non-dispersive Infrared Spectroscopy
* Range 0-100mmHg : 0-13.3kpa : 0-10%CO2
* Accuracy ±2mmHg or ±4% (whichever is greater)
* Respiration (awRR) Range 0 to 120 breaths/min
* Respiration (awRR) Accuracy ±1 breath/min
Recorder (Option)
* Type Thermal
* Weight 150g (0.33lbs)
* Resolution 8 dot/mm
* Number of channels 1 to 2 channels
* Paper Type Thermal
* Paper Width 50mm (2in)
* Paper Speeds 25.0mm/sec and 50.0mm/sec (1in/sec and 2in/sec)
General
* Dimensions 360(W) x 215(D) x 280(H)mm (14.2 x 8.5 x 11in)
* Weight 5.5kg (12.1lbs) (excluding optional configurations and accessories)
* Display - Screen Size 26.4cm (10.4in) measured diagonally, Screen Type/Color Liquid Crystal Display (LCD) color, Resolution 800 x 600 pixels
* Number of traces 4 or 6 waveforms
* Safety Standard IEC60601-1:1988+A1:1991+A2:1995
* Degree of protection (enclosures) IP21
* Type of protection Type CF - Applied part
Power Requirement
* AC Power 100-240V~50/60Hz, 0.5-1.3A
* Battery Ni-MH, 12V/3.8Ah (1 included)
Environmental
* Operating Temperature 10 to 40°C (50 to 104°F)
* Storage Temperature -20 to 60°C (-4 to 140°F)
* Operating Humidity 15 to 90% RH, non-condensing
Accessories
Most models: Reusable adult cuff, adult 3.5m cuff hose, ECG cable,
ECG 3-lead wires, SpO2 Durasensor® DS-100A, SpO2 extension cable
DOC-10, operation manual, power cord, rechargeable battery (1).
Available with: CO2 sampling set, printer paper, ECG 5-lead wires,
temperature probes, rolling stand, and a full size range of reusable and
disposable BP cuffs
Datascope Passport 2 Patient Monitor with Gas Module SE
Price : $2.900
The Datascope Passport 2 makes monitoring simple
* Very easy to use with navigator knob and dedicated function keys.* Maximum visibility with a 10.4” color TFT display and large numerics.
* Simple use and display management — six waveforms with automatic waveform display configuration.
* Most configurations feature 6 waveforms, 3 or 5-lead ECG with ESU noise rejection, lead-selectable resp., NIBP, Masimo SET® motion tolerant SpO2 and temp.
* Optional features include arrhythmia analysis, Microstream® ETCO2, Nellcor® SpO2, dual invasive pressures, 3-lead ST analysis with trends and alarms, and dual trace recorder.
* Store up to 120 patient time measurements with list and graph trends — extended memory can expand to 500 entries.
Basic features
* 10.4” color TFT display
* 3 to 6 waveforms with automatic expansion
* Auto-adjustable large numerics
* 3 or 5 lead ECG with ESU noise rejection, lead-selectable respiration, NIBP, Masimo SET® motion-tolerant SpO2, and temperature (400 or 700 series YSI probes)
* ECG and IBP analog output available for synchronization to balloon pump
* 6-minute OXY-CRG trend for neonatal and pediatric applications Built-in power supply for direct AC connection
Passport Benefits with Gas Module SE
* Advanced gas monitoring and analysis capabilities for Datascope Passport 2 patient monitors.
* O2, CO2 and N2O monitoring with automatic or manually controlled measurement of five anesthetic agents.
* For meeting comprehensive anesthesia monitoring requirements of nearly all hospitals and surgery centers.
* Available with optional Spirometry that measures patient’s airway pressures and lung volumes.